Windower: State of the Project Update! New Plugins!

**Julian** · 2013-01-22 20:48

I've also been experiencing the same issues with chatmon.

**Khajit** · 2013-01-23 17:43

Boxhelper seems to not be working right now after 2 hints.
Keeps on returning "somehow how possible choices" after 2 hints are obtained.Not sure what else i can really report.

**Mafai** · 2013-01-23 20:39

Originally Posted by Khajit

Boxhelper seems to not be working right now after 2 hints.
Keeps on returning "somehow how possible choices" after 2 hints are obtained.Not sure what else i can really report.

Do you mean "Somehow no possible choices?".

This is an error when it does not detect who you are correctly since the december update. If you would zone, it would likely work.

Test the update I just posted and let me know if it fixes your issue.

http://forums.windower.net/files/file/57-boxhelper/

**nikia** · 2013-01-23 21:47

Had a question about AutoExec, The hpp_$1 trigger, I want to use it for Twilight set for reraise if i fall under 30% HP. Does the trigger fire just 1 time once i fall under the threshold or will it constantly fire at every percent below the threshold?
Also once I go above the threshold when i fall under again will it work everytime or is it a run once type thing? So far been using lowhp to trigger but 20% seems a bit too low. Any insight would be wonderful, thank you.

**Mafai** · 2013-01-23 23:17

Originally Posted by nikia

Had a question about AutoExec, The hpp_$1 trigger, I want to use it for Twilight set for reraise if i fall under 30% HP. Does the trigger fire just 1 time once i fall under the threshold or will it constantly fire at every percent below the threshold?
Also once I go above the threshold when i fall under again will it work everytime or is it a run once type thing? So far been using lowhp to trigger but 20% seems a bit too low. Any insight would be wonderful, thank you.

Once, but you could do one for each percent if u wanted.

**Khajit** · 2013-01-25 02:28

Originally Posted by Mafai

Do you mean "Somehow no possible choices?".

This is an error when it does not detect who you are correctly since the december update. If you would zone, it would likely work.

Test the update I just posted and let me know if it fixes your issue.

http://forums.windower.net/files/file/57-boxhelper/

Tested and it seems fixed however the boxhelper I had was downloaded on the 28th so unless the windower site was slow to add the updated boxhelper I'm not sure how the problem could have come up. They should theoretically be the same file.

**Mafai** · 2013-01-25 13:35

Originally Posted by Khajit

Tested and it seems fixed however the boxhelper I had was downloaded on the 28th so unless the windower site was slow to add the updated boxhelper I'm not sure how the problem could have come up. They should theoretically be the same file.

After you posted I changed how your character name was detected.

**Khajit** · 2013-01-25 17:03

I just remembered a plugin Idea I got that I kept forgetting and I'm wondering if it's possible for anyone to create it.
Basically it's a voucher plugin to take out the voucher items in your spellcast. Probably a slight variation of gearcollector somehow and it would be nice to integrate find in order to move the vouchers into/out of sachel before/after use to save space since I just noticed one job taking up77 invo slots while my sack has 20 spaces free.

**Mafai** · 2013-01-26 00:00

Originally Posted by Julian

I've also been experiencing the same issues with chatmon.

Everyone having issues with chatmon and brosale tells, it should be fixed now. Also the custom filter should be working. Let me know if its not.

http://forums.windower.net/files/file/10-chatmon/

**Buffy** · 2013-01-26 05:39

Downloaded, can confirm custom spam filter works now, using the pickle example I tried earlier.

Thanks Mafai.

**Buffy** · 2013-01-28 14:12

How can I direct windower to use a different init.txt upon bootup for different characters?

**Byrthnoth** · 2013-01-28 14:14

You can't.

You need to do your customization after loading using autoexec.

**Mafai** · 2013-01-28 14:17

Originally Posted by Buffy

How can I direct windower to use a different init.txt upon bootup for different characters?

You could use autoexec and on the login event do exec char1ini.txt

Awhile ago I wrote batch files to swap the init files and he would use a shortcut for each. If above doesnt work i could look into that for you.

**nikia** · 2013-02-01 21:11

Since the January Version update I have been having issues with AutoExec triggers. I use AE to load a separate XML based on character login, then load event based on the job I am on.
It seems the login trigger is working and loading the second XML however the job events dont run half the time at time of login. Any help would be wonderful please.

Here is part of the XMLs incase anyone that can help wants to look it over. This is just a small section of each, the secondary one have several different job changes.

Again Any help or resolution would be wonderful. Also, if I was to go to the mog house and change jobs then it would trigger, it seems to be somehow tied to the initial login.
Thank you so much.

Main XML:

Code:

	<!--Turn on Call For Help Protect-->
	<register event="status_engaged" silent="true" runonce="true">input /blockhelp on</register>

	<!--Plugins to load based on Character Login-->
	<register event="login_Nikia" silent="true">
		load guildwork;
		drawdistance set 25;
		ae load NikiaAE.xml
	</register>

Secondary XML that loads on login:

Code:

	<import>AutoExec.xml</import>

	<!--Unregisters Monk events when you change to any other job-->
	<register event="(regex)jobchange_(?!MNK).*(/regex)" silent="true">
		ae unregister 12311;
		ae unregister 12312
	</register>

	<!--Rules for Find plugin tracking-->
	<register event="jobchange_*/*" silent="true">
		track clear
	</register>
	<register event="jobchange_*/nin" silent="true">
		wait 1;
		track add Shihei: ${INVENTORY:shihei} ;
		track add ---;
		track add Sanjaku-Tenugui: ${INVENTORY:sanjaku-tenugui} ;
		track add Shinobi-Tabi: ${INVENTORY:shinobi-tabi} 
	</register>

	<!--Monk-->
	<register event="jobchange_mnk/*" silent="true">
		input /macro book 1;
		wait 1;
		input /macro set 1;
		ae register 12311 "*buff_Perfect_Counter|losebuff_Berserk" input /ws "Dancing Chains" &lt;t&gt;;
		ae register 12312 "losebuff_Boost" sc var set BoostCount 0;
		bind f10 /ws "Shijin Spiral" &lt;t&gt;;
		wait 5;
		input /ws "Dancing Chains" &lt;t&gt;;
		input /echo [ Job change to Monk completed ]
	</register>

**Yugl** · 2013-02-01 21:16

The AE issue includes gainbuff as well.

**nikia** · 2013-02-01 22:24

Originally Posted by Yugl

The AE issue includes gainbuff as well.

So is it a known issue? I didnt see any mention of it anyplace.

**Yugl** · 2013-02-01 22:38

Known, idk. I just know people have issues with AE for variables.

**nikia** · 2013-02-01 22:46

Originally Posted by Yugl

Known, idk. I just know people have issues with AE for variables.

I know before update it worked perfect, been same setup for year or so. Is there anyway I could report it possibly? Also thanks for speaking with me.

**Yugl** · 2013-02-01 22:48

Either this thread: http://forums.windower.net/forum/50-windower-support/

or PM BG members of the windower community.

**nikia** · 2013-02-02 16:25

Wanted to update with some more info, It might actually be a log in event issue. I noticed just now when i logged in there was a 15-20 second delay on the login_event running. I assume by the time the event ran and loaded the secondary XML the jobchange events were then nullified. Again any insight would be great, thank you.

Also I am not 100% sure who is active on the Dev team, any chance you could PM me a name so I could contact them. Again thank you tons.

Thread: Windower: State of the Project Update! New Plugins!

Thread Tools

Similar Threads

Travialce's Report on the State of the Empire (03/06/2007)

Latest Threads

Up & Coming Threads

Hottest Threads