• Navigation
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 27
  1. #1
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Linksys WRT54GX2 v1 Constantly rebooting itself

    Starting last night my WRT54GX2 started rebooting itself repeatedly. Last week I had it drop out on me a few times but while streaming shows to my 360 and PS3 last night it went batshit insane. It'd stay connected for anywhere from a few seconds to a few minutes then reboot. I have the newest version of firmware from the Linksys website and I haven't had any problems with it for the year and a half that I've owned it up until the past few days. I can't even keep a connection long enough to open Firefox and go to sites because it just keeps cycling. Here is a chunk of the bottom of the log from last night when it started rebooting if it helps at all since I have no fucking clue what it means:

    Oct 26 00:34:12 (none) user.warn klogd: [0][12][3][13] Going to parse numSSID in the START_BSS_REQ, len=8
    Oct 26 00:34:12 (none) user.debug klogd: wns msg rcvd: type = 0x1300^Ilength = 32
    Oct 26 00:34:12 (none) user.debug klogd: wns msg rcvd: type = 0x1304^Ilength = 48
    Oct 26 00:34:26 (none) user.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 131
    Oct 26 00:34:26 (none) user.warn klogd: [0][12][3][1467] RECEIVED STOP_BSS_REQ with reason code=911
    Oct 26 00:34:26 (none) user.warn klogd: [0][12][3][1467] Triggering RESET_REQ
    Oct 26 00:34:26 (none) user.warn klogd: [0][10][2][1467] nimSysResetReq: Reason Code = 0x6

    Please don't tell me my router is dying and that I need to go buy a new one. >_< Thanks in advance for any help guys.

  2. #2
    Cerberus
    Join Date
    Jun 2008
    Posts
    464
    BG Level
    4

    Try doing a hard reset on the unit. Not quite sure how to do this for a linksys router since its different for every router. Also, you may want to try going back to an older firmware version or reflashing the current firmware

  3. #3
    Relic Horn
    Join Date
    Oct 2006
    Posts
    3,054
    BG Level
    7
    FFXI Server
    Cerberus
    WoW Realm
    Ravenholdt

    Hit that bitch with a hammer and buy a new router, easiest solution.

  4. #4
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Quote Originally Posted by shiarua View Post
    Try doing a hard reset on the unit. Not quite sure how to do this for a linksys router since its different for every router. Also, you may want to try going back to an older firmware version or reflashing the current firmware
    I've had the current version of firmware for a while now; I suppose it can't hurt to reflash it though. As far as a hard reset, you mean resetting everything to factory defaults?

  5. #5
    Old Merits
    Join Date
    Jun 2005
    Posts
    1,223
    BG Level
    6

    Linksys routers have some sort of compatibility issue with the consoles, this can be fixed by "hacking" the firmware, basically installing an alternate version of firmware.

    http://www.dd-wrt.com/dd-wrtv3/index.php

    This is the one that I used, haven't had a single problem since and it was super easy to install if you just follow their guide.

  6. #6
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    It's not just with my PS3 though, it was rebooting on me all day today and I wasn't touching my PS3 or 360. :/

    I'll try the modded firmware and hope that it works. :D

    EDIT: That site doesn't list my router as a supported device. -_-

  7. #7
    Relic Horn
    Join Date
    Oct 2006
    Posts
    3,054
    BG Level
    7
    FFXI Server
    Cerberus
    WoW Realm
    Ravenholdt

    Well, this is a bit different than the one I thought you had. Call linksys, they should be able to sort it out quickly.

  8. #8
    Puppetmaster
    Join Date
    Sep 2008
    Posts
    68
    BG Level
    2

    If you have uPnP enabled and you're using your ps3, your router will reset on occasion, I disabled media streaming and upnp for my ps3/router and I no longer have that issue, maybe give it a try and see if that helps.

  9. #9
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Disabling media streaming is not going to help me stream media to my PS3. >_<

    I'll try disabling uPnP(since I shouldn't need it anyway) and hopefully that fixes it. Just seems fucking weird I'd have problems with it now after not a single problem for half a fucking year.

    EDIT: uPnP disabled changes nothing. The router starts going fucking nuts as soon as the PS3 boots up. I'm going to retry media streaming on my 360 and see if it goes apeshit like the PS3 is.

    Edit2: Piece of shit is doing the same thing with my 360 now. I can hop online with either console but the moment I start trying to stream shit the router goes bananas. I haven't changed ANYTHING, why is it broken? -_-

  10. #10
    Old Merits
    Join Date
    Jun 2005
    Posts
    1,223
    BG Level
    6

    Try this firmware since the other guys didn't support yours.

    http://x-wrt.org/

  11. #11
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    How do I know which thing I need to download? O_O

    A couple of friends from Geek Squad suggested setting up a DMZ for my PS3 and 360 but the router only supports one DMZ IP. Can I have my 360 and PS3 share an IP address or is that going to fuck things up even more?

    If possible I'd like to get this shit working without having to flash some custom firmware onto the router or buying a new one.

  12. #12
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Bumpity bump. I assigned a new IP to the router and put a static IP on the 360 and PS3 and set them as DMZs. The PS3 still forces the router to reboot the moment it powers on but I actually got through half an episode of Californication before it rebooted and knocked the 360 off. :/

    This shit is so stupid. -_-

  13. #13
    Relic Horn
    Join Date
    Oct 2006
    Posts
    3,054
    BG Level
    7
    FFXI Server
    Cerberus
    WoW Realm
    Ravenholdt

    Quote Originally Posted by Auspice View Post
    Bumpity bump. I assigned a new IP to the router and put a static IP on the 360 and PS3 and set them as DMZs. The PS3 still forces the router to reboot the moment it powers on but I actually got through half an episode of Californication before it rebooted and knocked the 360 off. :/

    This shit is so stupid. -_-
    Buy a new router, save yourself the trouble.

  14. #14
    CoP Dynamis
    Join Date
    Feb 2007
    Posts
    257
    BG Level
    4
    FFXI Server
    Unicorn

    Yeah I used to have the same issue, it's the media streaming from the ps3. Although this doesn't really help, just not sure of another way around it (besides getting another router) since you want to use the media streaming.

  15. #15
    Relic Shield
    Join Date
    Sep 2004
    Posts
    1,596
    BG Level
    6
    FFXI Server
    Bahamut

    Is your net connection spliced before it gets to your modem? I had problems with my connection re-setting due to my cable line being over-spliced and thus causing my router to reset. I have a cable line spliced multiple times to 2 TVs and the modem. I put the modem earlier in the line before the final splice and it seemed to help the signal.

  16. #16
    Relic Weapons
    Join Date
    Jan 2008
    Posts
    298
    BG Level
    4
    FFXI Server
    Leviathan

    Quote Originally Posted by Korietsu View Post
    Buy a new router, save yourself the trouble.
    Take this guys advise and go out and buy yourself a different router.

    I was just having almost identical problems, and got fed up with it after a few days, went and bought a Belkin N wireless router.

    Everything runs better, my Xbox 360, PS3, FFXI, and even websites seemed to respond quicker. I doubt i will ever buy another linksys again with the problems i have had in the past.

  17. #17
    Relic Horn
    Join Date
    Oct 2006
    Posts
    3,054
    BG Level
    7
    FFXI Server
    Cerberus
    WoW Realm
    Ravenholdt

    Quote Originally Posted by Rydir View Post
    Take this guys advise and go out and buy yourself a different router.

    I was just having almost identical problems, and got fed up with it after a few days, went and bought a Belkin N wireless router.

    Everything runs better, my Xbox 360, PS3, FFXI, and even websites seemed to respond quicker. I doubt i will ever buy another linksys again with the problems i have had in the past.
    In general the WRT54GXXXX series have been iffy, but they can be great if you flash custom firmware onto them. One of the biggest things is turning off UPnP. Although I've never encountered the media streaming issue with it rebooting, I know it doesn't like UPnP at all. In all seriousness, they need to revise the router so it actually works properly with its factory firmware.

  18. #18
    YOU ARE SEARED
    Dungeon Master of the House of Weave

    Join Date
    May 2007
    Posts
    4,453
    BG Level
    7
    WoW Realm
    Kilrogg

    Slight aside:

    Quote Originally Posted by Auspice View Post
    A couple of friends from Geek Squad suggested setting up a DMZ for my PS3 and 360 but the router only supports one DMZ IP.
    Don't ever ask these guys for tech advice again lol, they clearly have no idea what a DMZ does if they're advocating you put your PS3/360 into that zone for simple intranet media streaming.

  19. #19
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Quote Originally Posted by Norellicus View Post
    Slight aside:



    Don't ever ask these guys for tech advice again lol, they clearly have no idea what a DMZ does if they're advocating you put your PS3/360 into that zone for simple intranet media streaming.
    It was just one of several suggestions including reformating my computer. -_-

    What model Belkin N router did you pick up? I'm tired of fucking with this router and am furious that it died after half a year.

  20. #20
    Drunken Red Mage
    Join Date
    Sep 2006
    Posts
    2,907
    BG Level
    7
    FFXIV Character
    Auspice Lasserott
    FFXIV Server
    Hyperion
    FFXI Server
    Cerberus

    Shameless bump!

    Because I'm a stubborn prick I still haven't picked up a new router and have instead been trying to figure out what the hell is wrong with this one. I refuse to accept that it's broken so I reflashed the firmware and at least it's not choking the moment I hop online with my PS3 or 360. I've been getting random reboots occasionally the past couple of nights so I think I may be okay. Although I still can't find a CFW that works with it.

    All I changed was setting my wireless mode to G-only instead of mixed and changed my data rate back to the default(it was set to 1-2mbps as per Nintendo's instructions to get my DS working with it). I figure if I want to hope online with it I'll change it myself.

    EDIT: As I'm typing this my router rebooted. -_- Here's the log:

    Spoiler: show
    Nov 18 00:13:33 (none) user.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 90
    Nov 18 00:13:34 (none) user.err ANISDKTOOL: aniAsfIpc.c:827 Port Map Get failed
    Nov 18 00:13:34 (none) user.err WSM: aniWsmDefaults.c:602 Ignoring BandType for Radio 0
    Nov 18 00:13:34 (none) user.err ANISDKTOOL: aniSdkAppsIf.c:2475 IPC Connect failed
    Nov 18 00:13:34 (none) user.err ANISDKTOOL: aniSdkAppsIf.c:8053 Failed to send admin state request to WSM
    Nov 18 00:13:34 (none) user.err ANISDKTOOL: aniSdkTool.c:288 aniSdkSetAdminStatus() failed
    Nov 18 00:13:34 (none) user.notice ANISDKTOOL: aniAsfLog.c: 84 Started ANISDKTOOL with Pid 99
    Nov 18 00:13:34 (none) user.warn klogd: Starting MAC FW module...radioID = 0 NUM_RADIO 1 - param_addr = 0x8051d0a8 start at C003B400
    Nov 18 00:13:34 (none) user.warn klogd: [0][1a][3][1190] bg = 1, nTx = 1, nRx = 1, cb=0, ap=1, mpci=0
    Nov 18 00:13:34 (none) user.warn klogd: [0][11][3][1] Sending CFG_DNLD_REQ
    Nov 18 00:13:34 (none) user.warn klogd: Register External Device (wlan0) vid (9) extPortNum (6)
    Nov 18 00:13:34 (none) user.warn klogd: Reserve port 6 for peripheral device use. (0x40)
    Nov 18 00:13:34 (none) user.warn klogd: Total WLAN/WDS links: 1
    Nov 18 00:13:34 (none) user.debug klogd: Airgo Fast Tx func registered.
    Nov 18 00:13:34 (none) user.debug klogd: Airgo Fast free func registered.
    Nov 18 00:13:35 (none) user.err WSM: aniWsmDefaults.c:602 Ignoring BandType for Radio 0
    Nov 18 00:13:35 (none) user.err WSM: aniWsmRadMisc.c:434 Radio (0) RadTimers - Freeing Timer RADAP_STT_TMR
    Nov 18 00:13:35 (none) user.err WSM: aniWsmRadMisc.c:357 Radio (0) Resetting Enb from RADENB_WF_CFG_DNLD_REQ
    Nov 18 00:13:35 (none) user.err WSM: aniWsmRadMisc.c:364 Radio (0) Resetting EnbAp from RADENBAP_WF_RAD_ENB
    Nov 18 00:13:35 (none) user.err WSM: aniWsmRadEnbCommon.c:111 Radio 0, defRadEnbCfgDnldReq - State RADENB_INIT
    Nov 18 00:13:35 (none) user.warn klogd: [0][12][2][1] received unexpected SME_STOP_BSS_REQ in state 2, for role 0
    Nov 18 00:13:35 (none) user.warn klogd: [0][12][2][1] eLIM_SME_SUSPEND_STATE
    Nov 18 00:13:35 (none) user.err AA: aagRadioDisable: radioId 0 to disable is not yet configured!
    Nov 18 00:13:35 (none) user.debug klogd: wns msg rcvd: type = 0x1300^Ilength = 32
    Nov 18 00:13:35 (none) user.warn klogd: wlan0: Rcvd a eWSM_DRV_RADIO_DISABLE_REQ for radio[0]
    Nov 18 00:13:35 (none) user.warn klogd: mac_mod_exit: Cleaning MAC FW module: radio Id 0
    Nov 18 00:13:35 (none) user.warn klogd: Starting MAC FW module...radioID = 0 NUM_RADIO 1 - param_addr = 0x8051d0a8 start at C003B400
    Nov 18 00:13:35 (none) user.warn klogd: [0][1a][3][1259] bg = 1, nTx = 1, nRx = 1, cb=0, ap=1, mpci=0
    Nov 18 00:13:35 (none) user.warn klogd: [0][11][3][1] Sending CFG_DNLD_REQ
    Nov 18 00:13:35 (none) user.warn klogd: Register External Device (wlan0) vid (9) extPortNum (6)
    Nov 18 00:13:35 (none) user.warn klogd: _devglue_regExtDevice: Redundant entry found, remove exist and register new one
    Nov 18 00:13:35 (none) user.warn klogd: Delete port 0 from peripheral port set. (0x40)
    Nov 18 00:13:35 (none) user.warn klogd: Unregister Extension device with LinkID 1 -- (wlan0)
    Nov 18 00:13:35 (none) user.warn klogd: Total WLAN/WDS links: 0
    Nov 18 00:13:35 (none) user.warn klogd: Reserve port 6 for peripheral device use. (0x40)
    Nov 18 00:13:35 (none) user.warn klogd: Total WLAN/WDS links: 1
    Nov 18 00:13:35 (none) user.debug klogd: Airgo Fast Tx func registered.
    Nov 18 00:13:35 (none) user.debug klogd: Airgo Fast free func registered.
    Nov 18 00:13:35 (none) user.warn klogd: [0][11][3][1] CFG size 3252 bytes MAGIC dword is 0xdeaddead
    Nov 18 00:13:35 (none) user.warn klogd: [0][11][3][1] CFG hdr totParams 187 intParams 144 strBufSize 756/1596
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET MIN PULSE WIDTH = 100
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET MAX PULSE WIDTH = 100
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET PULSE WIDTH MARGIN = 4
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET PULSE TR CNT1 = 3
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET PULSE TR CNT2 = 3
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET PULSE TR CNT3 = 5
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET RSSI TH = 60
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET MIN IAT = 5000
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET MAX IAT = 65535
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][1] CFG RDET MEAS DEL = 77
    Nov 18 00:13:35 (none) user.warn klogd: [0][14][2][7] Cfg param 177 indication not handled
    Nov 18 00:13:35 (none) user.warn klogd: [0][14][2][7] Cfg param 178 indication not handled
    Nov 18 00:13:35 (none) user.warn klogd: [0][10][3][7] CFG RDET FLAG = 0
    Nov 18 00:13:35 (none) user.warn klogd: [0][12][3][12] Going to parse numSSID in the START_BSS_REQ, len=8
    Nov 18 00:13:35 (none) user.debug klogd: wns msg rcvd: type = 0x1300^Ilength = 32
    Nov 18 00:13:35 (none) user.debug klogd: wns msg rcvd: type = 0x1304^Ilength = 48

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Connecting my DS to my Linksys WRT54GX2
    By Auspice in forum Tech
    Replies: 2
    Last Post: 2007-07-16, 14:44