Spellcast Help Thread (Link your XML using Pastebin.com for help!)

**Obsidian** · 2013-02-09 22:56

Yeah so, this rule is crashing me whenever my MP falls below 300. Any ideas why?

Code:

	<if MPLT="300">
		<if advanced='"$Stance"="BasicTP"'>
			<var cmd="set Stance MPLow" />
		</if>
		
		<if advanced='"$Idle"="PDT_Idle|MDT_Idle"'>
			<var cmd="set Idle MPidle" />
		</if>
	</if>

        <else>
		<if advanced='"$Stance"="MPLow"'>
			<var cmd="set Stance BasicTP" />
		</if>
		
		<if advanced='"$Idle"="MPidle"'>
			<if advanced='"$TypeIdle"="PDT"'>
				<var cmd="set Idle PDT_Idle" />
			</if>
			<elseif advanced='"$TypeIdle"="MDT"'>
				<var cmd="set Idle MDT_Idle" />
			</elseif>
		</if>
	</else>

**Fereydoon** · 2013-02-09 23:36

Can someone jimmyrig me a quick rule to TP in Ravager's +2 when Restraint is up? I tried this but it doesn't seem to work.

Code:

    
 <if spell="Restraint">
  <equip when="Precast">
   <hands>Ravager's Muffler's +2</hands>
  </equip>
  <if>

  <if BuffActive="Restraint">
   <equip when="aftercast|engaged">
   <hands>Ravager's Muffler's +2</hands>
   </equip>
  </if>

**Yugl** · 2013-02-10 00:16

Originally Posted by Obsidian

Yeah so, this rule is crashing me whenever my MP falls below 300. Any ideas why?

Code:

	<if MPLT="300">
		<if advanced='"$Stance"="BasicTP"'>
			<var cmd="set Stance MPLow" />
		</if>
		
		<if advanced='"$Idle"="PDT_Idle|MDT_Idle"'>
			<var cmd="set Idle MPidle" />
		</if>
	</if>

        <else>
		<if advanced='"$Stance"="MPLow"'>
			<var cmd="set Stance BasicTP" />
		</if>
		
		<if advanced='"$Idle"="MPidle"'>
			<if advanced='"$TypeIdle"="PDT"'>
				<var cmd="set Idle PDT_Idle" />
			</if>
			<elseif advanced='"$TypeIdle"="MDT"'>
				<var cmd="set Idle MDT_Idle" />
			</elseif>
		</if>
	</else>

Code:

		<if advanced='"$Idle"="PDT_Idle|MDT_Idle"'>

You cannot use "PDT_Idle|MDT_Idle", you need to use '"$Idle"="PDT_Idle" OR "$Idle"="MDT_Idle"' instead.

**Yugl** · 2013-02-10 00:18

Originally Posted by Fereydoon

Can someone jimmyrig me a quick rule to TP in Ravager's +2 when Restraint is up? I tried this but it doesn't seem to work.

Code:

    
 <if spell="Restraint">
  <equip when="Precast">
   <hands>Ravager's Muffler's +2</hands>
  </equip>
  <if>

  <if BuffActive="Restraint">
   <equip when="aftercast|engaged">
   <hands>Ravager's Muffler's +2</hands>
   </equip>
  </if>

If you add that to the bottom of the XML that might work.

**Obsidian** · 2013-02-10 00:38

Originally Posted by Yugl

Code:

		<if advanced='"$Idle"="PDT_Idle|MDT_Idle"'>

You cannot use "PDT_Idle|MDT_Idle", you need to use '"$Idle"="PDT_Idle" OR "$Idle"="MDT_Idle"' instead.

Is that all on one line then?

Code:

<if advanced='"$Idle"="PDT_Idle" OR "$Idle"="MDT_Idle"'>

?

**Fereydoon** · 2013-02-10 00:55

Originally Posted by Yugl

If you add that to the bottom of the XML that might work.

Friend said it wasn't, I was pretty sure it would, is it the way Muffler's are written?

**Yugl** · 2013-02-10 01:05

Originally Posted by Obsidian

Is that all on one line then?

Code:

<if advanced='"$Idle"="PDT_Idle" OR "$Idle"="MDT_Idle"'>

?

I believe so. Here's a cheap example from an existing rule I have:

Code:

        <if SpellTargetType="MONSTER" advanced='("%SpellElement"="%WeatherElement" OR "%SpellElement"="%DayElement") AND "$Obi-%SpellElement"!="0"'>

**Yugl** · 2013-02-10 01:05

Originally Posted by Fereydoon

Friend said it wasn't, I was pretty sure it would, is it the way Muffler's are written?

Didn't even notice that. He or she should have written "Mufflers", instead of "Muffler's." There isn't a person named Muffler that owns +2 haha.

**Obsidian** · 2013-02-10 04:11

Think I figured out what my crashing problem was, and it's pretty dumb. MPLow inherits from $Stance, but I was setting Stance to MPLow. Now I know why I only seemed to crash when casting spells while engaged...

*facepalm*

**Nicolette** · 2013-02-11 14:54

im having issues. I quit about 3 years ago, so dont judge my gear in this spellcast lol, but for some reason almost none of this is working, buffactive isnt registering when I go to convert finishing moves to TP, //sc set var doesnt seem to change variables, and //sc set doesnt appear to change gear. I cant find a list of things that have been changed, or what theyve changed to or how to update the spellcast to work. Does it just need to be completely redesigned? I looked over mortensen's dnc and it not only doesnt seem to do what I need, but is crazy technical to boot. Is it that you cant //sc in macros anymore? Because from what i've seen people seem to be using keybinding to get around macroing sets. Ive updated my resources, all my xml's and windower itself. I loaded with a bare spellcast so I could determine if it was spellcast itself or the xml causing the issue, and it seems to be the xml. I'll keep browsing around other's work and googling to see if I can help myself, but any assistance would be appreciated.

http://pastebin.com/DzqGwx6p

**Snprphnx** · 2013-02-11 16:00

having an issue with gearcollector. i am trying to make a single gearset in each of my xmls called "gearcollector", so that i am sure to grab all the stuff i need, and i just need to type //gc nin gearcollector. however, when i include this set in my xmls, gear collector will start working, clearing out all my gear in my inventory, and not putting gear back into it.

**Kohan** · 2013-02-11 19:50

Originally Posted by Nicolette

im having issues. I quit about 3 years ago, so dont judge my gear in this spellcast lol, but for some reason almost none of this is working, buffactive isnt registering when I go to convert finishing moves to TP, //sc set var doesnt seem to change variables, and //sc set doesnt appear to change gear. I cant find a list of things that have been changed, or what theyve changed to or how to update the spellcast to work. Does it just need to be completely redesigned? I looked over mortensen's dnc and it not only doesnt seem to do what I need, but is crazy technical to boot. Is it that you cant //sc in macros anymore? Because from what i've seen people seem to be using keybinding to get around macroing sets. Ive updated my resources, all my xml's and windower itself. I loaded with a bare spellcast so I could determine if it was spellcast itself or the xml causing the issue, and it seems to be the xml. I'll keep browsing around other's work and googling to see if I can help myself, but any assistance would be appreciated.

http://pastebin.com/DzqGwx6p

There used to be a SpellCast updating tool, but it is unfortunately not working now (http://windower.net/plugins/spellcastupdatexml.php). I thought that the direct URL may be the wrong one to offer, and that there was a form elsewhere to fill out first, but all old links on the Windower forums point straight to that URL. Perhaps someone on the Windower team will explain why it is down (as it could be too out of date now—I haven't the slightest), or be able to point you toward a new link.

That aside, if you haven't already, what you should do is visit the Windower site and update all of your plug-ins, including SpellCast (http://windower.net/plugins.html). I'd also ensure that you have the most recent version of Windower itself. You can at least do that while waiting for a direct response about your XML.

**Gun-it** · 2013-02-11 22:08

Originally Posted by Gun-it

Code:

	<if Spell="Update" advanced='"$HB"="HB"'>
<return />
</if>

<if commandprefix="/pet">

	<if spell="Restoring Breath">
	<var cmd="set HB HB" />
<coimmand>wait 3;input /sc var set HB Blank</command>
	<equip lock="true" when="idle|engaged|resting|precast|midcast|aftercast">		
			<neck>Lancer's Torque</neck>
			<head>Wyrm Armet +2</head>
			<legs>Drachen Brais +1</legs>
			<waist>Glassblower's Belt</waist>
			<lear>Lancer's Earring</lear>
			<back>Lancer's Pelerine</back>
			<hands>Ostreger Mitts</hands>
			<body>Wyvern Mail</body>
			<feet>Wyrm Greaves +2</feet>
			</equip>
			<AfterCastDelay Delay="3.5" />
		</if>
</if>

Then like that? I feel like I am missing something with the var?

Finally had time to test this and it is still not working.

**Raffi_XI** · 2013-02-12 10:50

line 9 has <coimmand> instead of <command>

**Nicolette** · 2013-02-13 18:23

Originally Posted by Snprphnx

having an issue with gearcollector. i am trying to make a single gearset in each of my xmls called "gearcollector", so that i am sure to grab all the stuff i need, and i just need to type //gc nin gearcollector. however, when i include this set in my xmls, gear collector will start working, clearing out all my gear in my inventory, and not putting gear back into it.

I dont think gearcollector works anymore. does anyone out there still have it working?

**stamos** · 2013-02-13 23:01

nvm lol

**Yugl** · 2013-02-13 23:46

Did you update SC?

**mallister** · 2013-02-13 23:51

my GC works fine.

**stamos** · 2013-02-14 00:35

Originally Posted by Yugl

Did you update SC?

It had been a while. Was using 3.3X or something

**Helel** · 2013-02-14 01:22

GC works fine. Everything needs to be correctly capitalized, and the items in your groups need to be written exactly as they appear in the menu, NOT in the item description. For instance, Mavi Bazubands +2 need to be written as Mv. Bazubands +2.

The command I type inside my mog is //gc Helel RNG - which then grabs all my RNG gear. The "Helel" is the name of the XML, and the "RNG" is the name of the group. Note that Helel needs to be capitalized (because the XML is) and RNG needs to be capitalized (because it is capitalized inside the XML). If they are not capitalized then it will just empty my inventory.

Thread: Spellcast Help Thread (Link your XML using Pastebin.com for help!)

Thread Tools

Similar Threads

Spellcast Shop Thread

time spent on ls events, helping friends and your own time

Latest Threads

Up & Coming Threads

Hottest Threads