Switching to Watercooling, first time, gtx480 involved.

[CoronA1979]

Well, you could use a single bay Reservoir and mount the pump somewhere in the case. It comes w/ a mount - I'm guessing you're going to hang the radiator off the back?

[Boyiee]

Rad and res were probably going on the side panel that isn't used for access,

[Boyiee]

Update: Finally got the money in to do this, doing GPU only for now. Need you guys to double check and help me out with tubing/fittings.

Reservoir: http://www.dangerden.com/store/dange...reservoir.html
Fans: http://www.frozencpu.com/products/10...12B5AP-15.html (not sure on rpm or cfm I should get.. newegg has a billion models)
Pump: http://www.swiftnets.com/products/mcp655.asp
Block: http://www.dangerden.com/store/dd-gt...r-version.html there is also a nickel version
Rad: http://www.frozencpu.com/products/85..._Radiator.html thinking about the 3fan version


Not sure of which Tubing or compression fittings to get. Site recommends http://www.jab-tech.com/PrimoFlex-Pr...D-pr-4425.html but the ID for the block is 1/2. Will this work with compression fittings?

My goal is cool and quiet. I want to reduce the heat by a ton, but I don't want it to be too loud. The typhoons seem to be well capable of doing this, just not sure which model to get.

Edit: Changed pump to : http://www.newegg.com/Product/Produc...-082-_-Product
Changed res to : http://www.frozencpu.com/products/11...Reservoir.html
gonna go half inch tubing with compressions (minus the pump, sadface) http://www.jab-tech.com/PrimoFlex-Pr...D-pr-4116.html
http://www.jab-tech.com/Bitspower-Bl...5-pr-4454.html

Looks like I'm all set, any additional comments or concerns would be great.

[Boyiee]

Ok Final build, same as above, comments concerns I'd really appreciate. Note: Having trouble finding the right fans for the radiator, the 1450rpm scythe gentle typhoons arent in stock in many places. If anyone has another recommendation for fans that are quiet, but will provide good airflow/cooling with the XSPC RX240 it would be great.

Block: http://www.dangerden.com/store/dd-gt...r-version.html with compression fittings, available in nickel if it'll make much difference.
Reservoir: http://www.frozencpu.com/products/11...Reservoir.html
Radiator: http://www.frozencpu.com/products/85...?tl=g30c95s160
Pump: http://www.newegg.com/Product/Produc...-082-_-Product
Tubing: http://www.jab-tech.com/PrimoFlex-Pr...D-pr-4116.html 1/2 x 3/4
Fittings: http://www.jab-tech.com/Bitspower-Bl...5-pr-4454.html
Water: http://www.frozencpu.com/products/69...tl=g30c103s702

Just need the right fans, to decide if I want the 2 fan or 3 fan radiator, and to place the orders.